LIQUIDO DE FRENOS MOTO DOT 5.1

For brake and clutch hydraulic circuits. Long life 100% synthetic fluid. DOT 5.1 SILICONE FREE.

APPLICATIONS: For all brake and clutch hydraulic systems meeting or recommended by manufacturers' DOT 5.1, DOT 4 and DOT 3 specifications. Fluid specially designed for anti-lock braking systems (ABS).

PERFORMANCE: FMVSS 116 DOT 3 / 116 DOT 4 / 116 DOT 5.1 NON SILICONE BASE, ISO 4925 (5.1, 4 & 3) and SAE J1703. Long life fluid: Very high wet boiling point (185 °C / 365 °F), higher than other DOT 4 (155 °C mini / 311 °F mini) and DOT 3 (140 °C mini / 284 °F mini) fluids allows long life products to be used. This type of DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property of absorbing moisture from the air, lowering the boiling point and therefore the braking safety. The wet boiling point is representative of the condition of the fluid after one year of use. Particularly suitable for anti-lock braking systems (ABS): The lower viscosity (820 cp. at -40 °C) than conventional DOT 4 (up to 1800 cp.) and DOT 3 (up to 1500 cp.) fluids allows the fluid to flow easily between the microvalves of the anti-lock braking system without hindering their movement. Neutral behaviour with the seals used in braking systems. Anti-corrosion.

RECOMMENDATIONS: Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE-BASED products. Do not mix with mineral based fluids (LHM) and silicone (DOT 5 silicone based). Keep the product in its container, well closed and dry. Aggressive chemical product for hands, paints and varnishes. In case of contact with skin, wash with plenty of water. Fluid change: 12 to 24 months according to the manufacturer's recommendation.

TECHNICAL CHARACTERISTICS
Visual colour Yellow
Viscosity at 100 °C (212 °F): 2.1 mm²/s
Viscosity at -40 °C (-40 °F): 820.0 mm²/s
Dry boiling point: 269.0 °C / 516.0 °F (269.0 °C / 516.0 °F)
Wet Boiling Point: 187.0 °C / 369.0 °F