High Performance Motorcycle Lubricant. 100% Synthetic - Ester.
APPLICATIONS : touring motorbikes, trails, dirt bikes, enduro, trial... 4-stroke engines with integrated gearboxes or not and oil-immersed or dry clutch, engines complying with Euro 2, 3, 4 and 5 anti-pollution standards, equipped with exhaust gas treatment systems: catalytic converters, exhaust air injection... Particularly recommended for KTM, HUSQVARNA which recommend SAE 10W-50 grade oils for some of their models. Other applications: motorbikes without catalytic converters, scooters, quads, mopeds...
PERFORMANCE
STANDARDS: API SN / SM / SL / SJ / SJ / SH / SG
PERFORMANCE: JALOS MA2 under N ° M033MOT162
Ester Technology Protection: - Esters with a low traction coefficient to reduce friction losses inside the engine and improve performance. - Synergy of Ester with anti-wear and shear resistance additives to ensure longevity of the gearbox gears. - 100% synthetic lubricant to improve lubricant film strength at high temperatures and high engine speeds. - Low Phosphorus and Sulphur optimised (according to JASO MA2 < 1200 ppm) to ensure the performance and durability of the exhaust catalytic converters. - Gearbox protection thanks to innovative anti-wear additive technology: FZG test results = FLS> 14: The FZG test (Forschungsstelle für Zahnrader und Getriebebau) evaluates the lubricating and anti-wear protection capacity of the fluid between two pinions subjected to variable coupling. The lubricant is classified according to its "load breakage level" called FLS (Load Phase Failure) from FLS 1 (very bad result) to FLS 14 (exceptional result). Comfort JASO has created its own standard - JASO T903 - for 4-stroke motorbike engines which comprises three levels: JASO MA, MA1, MA2 The JASO MA2 specification offers the highest level of friction to guarantee perfect clutch friction in the three phases of operation: at start-up, acceleration and top speed.
RECOMMENDATIONS : Maintenance intervals : According to the manufacturer's recommendations and adapted to your own use. Can be mixed with synthetic or mineral oils.
TECHNICAL CHARACTERISTICS
Colour: Visual -> Red
Viscosity grade: SAE J 300 -> 10W-50
Density at 20 °C (68 °F): ASTM D1298 -> 0.861
Viscosity at 40 °C (104 °F): ASTM D445 -> 120.5 mm2/s
Viscosity at 100 °C (212 °F): ASTM D445 -> 18.1 mm2/s
Viscosity index: ASTM D2270 -> 167.0
Freezing point: ASTM D97 -> -33.0 °C / -27.0 °F
TBN: ASTM D2896 -> 8.4 mg KOH/g
Flash point: ASTM D92 -> 232.0 °C / 450.0 °F
Container Measurements:
- 0,00Height mm:
- 0Width mm:
- 0,00Bottom mm:
- 0,00Weight gr:
Subbox Measurements:
- 0,00Height mm:
- 0,00Width mm:
- 0,00Bottom mm:
- 0,00Units x subbox:
Master Box:
- 0,00Height mm:
- 0,00Width mm:
- 0,00Bottom mm:
- 0,00Net weight g:
- 0,00Gross weight g:
- 4,00Subboxes x master box:
- 0,00Units per Master Box:
Palet:
- 0,00Boxes x layer:
- 0,00Pallet layers:
Container:
- 0,00Uds x Container:
- 0,00UPA: